Firmware for Micro USB

Resolve_firmwareV3.4(Celsius) Resolve_firmwareV3.4(Fahrenheit)

Changelog:

• sleep mode current draw of 40mA including Leaf components

• more aggresive regen at lower RPM

• removed BMS error 204 since was active when nothing was wrong on newer BMS

• brake pedal stops in Reverse also.

Resolve_firmwareV3(Celsius) Resolve_firmwareV3(Fahrenheit)

Changelog:

• BMS Errors are now visible in the display, read owners manual for more info

• changed displayed state of charge to usable state of charge, from 0-100%. 

• change maxcharge percentage to 85% now since it’s based on usable SOC.

• when regen is off it’s now truly off applying zero negative torque.

• it is now possible to regen at any SOC since it will limit maximum regen based on the Leaf BMS.

• motor torque is now limited by the Leaf BMS instead of gradually decreasing. 

• changed how maximum torque works at low SOC, more torque at lower RPM and decreases until no torque at 0% displayed soc

• fixed Chademo quick charging bug

• pedal improvements.

Resolve_firmwareV2.8(Celsius) Resolve_firmwareV2.8(Fahrenheit)

Changelog:

• fixed minor PDM precharge issue

Resolve_firmwareV2.7(Celsius) Resolve_firmwareV2.7(Fahrenheit)

Changelog:

• fixed display issue

Resolve_firmwareV2.5(Celsius) Resolve_firmwareV2.5(Fahrenheit)

Changelog:

• fixed issue with Leaf pedal

Resolve_firmwareV2.3(Celsius) Resolve_firmwareV2.3(Fahrenheit)

Changelog:

• fixed temperature display issue

ResolvefirmwareV2.2 (Celsius) Resolve_firmwareV2.2(Fahrenheit)

Changelog:

• Supports all inverters, chargers and batterypacks after 2013

• Possible to change regen strength while driving

• Discharge limit, for more info read the Owner's manual

• Improved pedal safety

• Improved CAN message safety

Firmware for USB C

Resolve_firmwareV3.4(Celsius)

Resolve_firmwareV3.4(Fahrenheit)

Changelog:

• removed BMS error 204 since was active when nothing was wrong on newer BMS

• more aggresive regen at lower RPM

Resolve_firmwareV3.2(Celsius)

Resolve_firmwareV3.2(Fahrenheit)

Changelog:

• Sleep mode: the whole system now has a current draw of 20mA incl. pedal, PDM, BMS and oled. OLEDs purchased before February 2024 have slightly higher current draw which means that the entire system draws 26mA.

• Remove battery warning lamp since newer battery packs receive this error regardless if something is actually wrong

• Fixed small Leaf pedal rolling at zero torque.

• Brake pedal stops reverse also.

Resolve_firmwareV3(Celsius) Resolve_firmwareV3(Fahrenheit)

Changelog:

• BMS Errors are now visible in the display, read owners manual for more info

• changed displayed state of charge to usable state of charge, from 0-100%. 

• change maxcharge percentage to 85% now since it’s based on usable SOC.

• when regen is off it’s now truly off applying zero negative torque.

• it is now possible to regen at any SOC since it will limit maximum regen based on the Leaf BMS.

• motor torque is now limited by the Leaf BMS instead of gradually decreasing. 

• changed how maximum torque works at low SOC, more torque at lower RPM and decreases until no torque at 0% displayed soc

• fixed Chademo quick charging bug

• pedal improvements.