Updating the Resolve Controller
In the tabs below please select if you have a Resolve controller with a Micro USB port or with a USB-C port
Update
TextUUp
- [Micro USB] Resolve Controller
- [USB-C] Resolve Controller
Resolve_firmwareV3.4(Fahrenheit)
Changelog:
- sleep mode current draw of 40mA including Leaf components
- more aggresive regen at lower RPM
- removed BMS error 204 since was active when nothing was wrong on newer BMS
- brake pedal stops in Reverse also.
Changelog:
- BMS Errors are now visible in the display, read owners manual for more info
- changed displayed state of charge to usable state of charge, from 0-100%.
- changed maxcharge percentage to 85% now since it’s based on usable SOC.
- when regen is off it’s now truly off applying zero negative torque.
- it is now possible to regen at any SOC since it will limit maximum regen based on the Leaf BMS.
- motor torque is now limited by the Leaf BMS instead of gradually decreasing.
- changed how maximum torque works at low SOC, more torque at lower RPM and decreases until no torque at 0% displayed soc
- fixed Chademo quick charging bug
- pedal improvements.
[USB-C] How to update the Resolve Controller
Resolve_firmwareV3.4(Fahrenheit)
Changelog:
- removed BMS error 204 since was active when nothing was wrong on newer BMS
- - more aggresive regen at lower RPM
Resolve_firmwareV3.2(Fahrenheit)
Changelog:
- Sleep mode: the whole system now has a current draw of 20mA incl. pedal, PDM, BMS and oled. OLEDs purchased before February 2024 have slightly higher current draw which means that the entire system draws 26mA.
- Remove battery warning lamp since newer battery packs receive this error regardless if something is actually wrong
- Fixed small Leaf pedal rolling at zero torque.
- Brake pedal stops reverse also.